Beko oven F02 error code
F02 means oven temperature sensor fault. The cavity sensor is out of range, so heating is stopped until the fault clears..
Engineer usually needed · Fault type: Electrical/hardware
Safe checks, in order of likelihood
- Switch off at the wall for 10 minutes and retry.
- If the oven heats then cuts out with F02, the sensor is the prime suspect.
- Check the sensor probe inside the cavity is seated and undamaged.
Call a professional when…
Reset; then the NTC sensor is replaced. If the code returns after these checks, book a qualified engineer.
Parts usually involved
- Beko oven NTC sensor.